Coolant System Leaks
|
04-24-2017, 19:01
Post: #4
|
|||
|
|||
RE: Coolant System Leaks
(04-24-2017 18:42)travelite Wrote: Thanks Hish, I appreciate the added info. You're absolutely correct, the Breeze clamps have that visual clamping reference which you describe. Thanks for reminding me! Installation A torque wrench should be used for proper installation. The recommended torque is 90 to 100 lbf•in. (10 to 11 N•m). The Belleville spring washer stacks should be nearly collapsed flat and the screw tip should extend ¼" (6 mm) beyond the housing (Fig. 3). FIGURE 3: CONSTANT-TORQUE CLAMP 05037 Caution: The hose clamps will break if overtorqued. Do not over-tighten, especially duri |
|||
The following 1 user Likes Hisham Amaral's post: davidbrady (04-24-2017) |
« Next Oldest | Next Newest »
|
Messages In This Thread |
Coolant System Leaks - davidbrady - 04-24-2017, 18:13
RE: Coolant System Leaks - Hisham Amaral - 04-24-2017, 18:32
RE: Coolant System Leaks - travelite - 04-24-2017, 18:42
RE: Coolant System Leaks - Hisham Amaral - 04-24-2017 19:01
RE: Coolant System Leaks - davidbrady - 04-24-2017, 20:08
|
User(s) browsing this thread: 1 Guest(s)